Beginners Guides
Can Solar Panels Charge an Electric Car?

If you own an electric vehicle, you may be wondering, “Can solar panels charge an electric car?” It depends on the type and size of the solar panel, the distance traveled and the battery size. It is also important that you consider how much sun your panels receive. An EV equipped with a 62-kWh battery, for example, can travel 215 miles. This car may also be eligible for a $7500 Clean Vehicle Credit.
Cost of charging an electric car with solar panels
A solar panel can be installed at home to lower the cost of charging your electric car. However, it is important to understand that charging an EV does not always result in excess energy, so it is important to figure in additional charges. The calculator below is free and easy to calculate how much additional electricity you will require.
Solar-panel-powered charging can be up to 40 percent cheaper than charging a gasoline-powered car. The savings are due to the lower cost of batteries and rooftop solar panels. Unlike grid-powered charging, solar-powered charging is also better for the environment. Solar power can reduce your carbon footprint and many EVs are eligible for federal and state tax credits.
The cost of charging your electric car with solar panels will depend on the size of the solar panel set and where you live. The installation can cost around $1,300 in the Western U.S., or $850 in the Central and Southeast U.S., and $900 to $1,200 in the Northeast.
The number of solar panels you need will depend on how much driving you do each day. An electric car needs about five to seven 350-watt solar panels to reach full charge. On the other hand, a Porsche Taycan 4S will need ten panels to reach full charge.
Electricity costs are generally more stable than gasoline, but they can vary widely between states. The average residential rate per kilowatt-hour varies from 9.8 cents per kilowatt-hour in Alabama to 35.6 cents in Hawaii. The national average is 14 cents per kilowatt-hour.
There are three main levels of charging available for EVs: Level 1 charging, which costs $4.90, Level two charging, and Level three charging. The first level charges are free, but charging a Level two EV with a Level 3 charger costs $8.05. This is a great way to charge your electric car while on the move.
As an alternative energy source, solar-powered charging of EVs can save you money and help the planet. Charging an EV with solar energy will also help you reduce your electricity bill.
Cost to charge an electric car using grid power
There are several options for charging an electric car with grid power, including solar panels and public charging stations. Grid power costs are determined by kWh (or kilowatt hours). Although the cost of using grid power varies depending on where you live, it is usually between $.10 and $.40 per kWh. A typical EV needs around 12 kWh to make a 40-mile round trip.
Using solar power to charge an electric car is the most cost-effective option. It costs only $26 per month, which is significantly lower than the cost of grid electricity. It is also less polluting. Solar charging can save you up to $1,800 over a year.
Although the costs of grid power vary depending on where you live, they are generally lower than those associated with gasoline. A Canadian academic has calculated that an electric car owner will save approximately EUR5000 over its lifetime by using grid power. Time-of-use billing rates vary, with some overnight off-peak rates as low as $.07 per kWh, while SDG&E’s bottom rates are about $.29 per kWh.
Many large fleet operators, shopping centers, and corporate offices are interested in hosting public EV charging stations. In addition, they are looking to partner with charge-point operators to help with the logistics and customer service. These operators can offer services that lower costs to all customers and coordinate grid upgrades and expansion plans. Customers can switch to EVs by coordinating grid upgrades and expansion plans.
The cost of grid power and electricity vary greatly in the U.S., ranging from 9.8 cents per kilowatt-hour in Alabama to 35.6 cents in Hawaii. The national average is approximately 14 cents per Kilowatt-hour. California’s average cost is approximately two-thirds lower than the national average.
Compared to gasoline cars, EVs are cheaper to own, but the cost of grid power will eventually start to affect the electricity grid. As more EVs become available, the grid will experience more pressure as more batteries are added.
Cost of charging an electric car with solar panels on a sunny day
An electric car powered by solar energy is a cost-effective and environmentally friendly way to travel. A single panel can generate approximately 850 kWh annually. This is enough power to charge a Honda e 24x and provide 3,250 miles of range. While that amount is large, the average domestic solar-panel installation does not generate enough electricity to charge an electric car during a single day.
However, charging your electric car during the day can be costly if the sun is not present. You will also need to store your energy which increases the cost. You will need to buy batteries in order to store this power. Batteries can be expensive and have a limited lifespan. Acid-lead batteries, for example, can last up to eighteen years with proper maintenance.
You will need to charge six cents per day for batteries if you want to charge your car with solar energy. However, the initial investment will be well worth it in a few years. The cost of a solar-panel-powered electric car will be reduced by more than PS13,000 over the lifetime of the vehicle.
The cost of solar energy to charge an electric car is dependent on many factors such as the amount of sun in your area, the type of panels and how much. For example, the typical electric car uses about 3 miles per kilowatt-hour, so you will need five to ten panels to charge a single car, and twenty-five panels for a full charge.
Charging an electric car with solar energy is cheaper than using public power or buying gas. It costs half the price to charge an electric vehicle than a standard gasoline vehicle. This is equivalent to buying more than 25 years worth of fuel. Solar energy will be even cheaper if you live in a sunny location.
A solar panel installed on your roof can be used to charge your electric car using solar power. Installing solar panels on your roof is often cheaper than using public chargers or grid power. You can even get a free service that will connect you with the top-rated solar installers in your area.
Beginners Guides
Wind Turbine Or Electric Generator

Wind turbines or electric generators harness the energy of wind and convert it to electrical current, creating a renewable source that won’t run out.
Turbines feature two or three blades attached to a rotor that rotates due to an internal shaft, creating electricity.
It is a renewable energy source
Wind turbines or electric generators are devices that harness the energy of wind to produce electricity. This renewable source can replace fossil fuels like coal and oil, helping you reduce your carbon footprint.
Wind is a powerful natural force that blows in various patterns and speeds around the world. People have harnessed this motion power for many purposes, from sailing boats and flying kites to pumping water or grinding grain for food.
Wind turbine or electric generator utilizes kinetic energy from blades to spin a shaft within its nacelle, spinning an electric generator. The nacelle and shaft are connected to an internal gearbox which also turns, sending all of that rotational motion back into the generator.
Wind can create a low-pressure pocket on the downwind side of a blade, creating lift and forcing it to turn just like an airplane’s wing does when hit by wind.
Once the rotor of a turbine turns, coils of wire move through an electromagnetic field and generate electricity which is then transmitted via transmission lines to homes.
Wind power differs from fossil fuels, such as coal, oil and natural gas sources in that it does not emit greenhouse gases when converted to electricity. As such, wind energy plays an integral role in the global transition towards sustainable energy generation.
Wind power offers many advantages over traditional energy sources, but the technology can still present some drawbacks. For instance, wind farms must be situated carefully and in suitable places so as not to cause harm to nearby wildlife.
Furthermore, wind turbines need transmission lines to reach homes and businesses. This additional infrastructure can be expensive and time-consuming to construct, especially if the turbines are far away from major energy centers where homes and businesses require electricity.
Wind power has never been more accessible or cost-effective than it is now, as demand for renewable energy continues to grow. Additionally, this form of renewable energy could help the United States transition away from reliance on foreign oil and coal imports – something especially crucial for its economy which faces volatile energy prices and supply issues.
It is a clean energy source
Wind turbines are machines that harness energy from wind. Similar to airplane propeller blades, they capture the kinetic energy of the breeze and use it to propel a generator for producing electricity.
Wind turbines consist of two or three blades attached to a shaft that spin clockwise when exposed to wind energy. This captured motion is used to rotate the main shaft, which in turn spins a gearbox within the nacelle and transforms that kinetic energy into mechanical motion which generates electrical energy.
Wind-powered turbines, unlike gas or steam turbines that burn fossil fuels and other chemicals to generate their electricity, are entirely pollution free. Their waste is non-toxic and can be recycled.
Wind turbines not only generate clean energy, but they can also make landholders money through selling their generated electricity back to the grid. This has several advantages for them, such as protecting them from power outages and stabilizing energy prices.
Wind turbines are also seen as an excellent investment due to their relatively low operating costs once installed. This makes them attractive options for those seeking to reduce their electricity bill while doing something good for the environment.
Another advantage to wind turbines is their potential to reduce carbon emissions. According to a study published by the US Department of Energy, if 35% of America’s electricity were generated through wind power, greenhouse gas emissions would be reduced by 23%.
Wind turbine electricity generation costs are lower than those from other renewable energy sources such as solar or hydropower, due to its long-term sales at a fixed price. Unlike fossil fuels which experience sudden spikes in price, electricity generated from wind turbines remains stable over time.
It is a cost-effective energy source
Wind turbines and electric generators are one of the most cost-effective energy sources available. They can be used to power homes or businesses without producing any hazardous gases or particulate matter, meaning they don’t cause smog or acid rain and help reduce global warming.
Farmers and ranchers in rural areas who receive rent payments from wind plant owners also benefit from wind energy. This makes wind energy an appealing option for those in rural areas, where many of the best wind sites are situated.
Due to this trend, the cost of electricity from renewable sources such as wind turbines has drastically declined in recent years. According to IRENA’s report in 2017, solar and wind energy could be acquired for 4 to 6 cents per kilowatt-hour and are forecasted to become even cheaper within the next few years.
Furthermore, renewable energy sources are less vulnerable to oil price volatility. This makes them more reliable and predictable, shielding your family from unpredictable costs.
The amount of energy generated by a wind turbine depends on its speed and density; the stronger the wind, the greater its electricity production. Furthermore, climate and temperature play an important role; warm air has more energy than cold air does.
Wind turbine models can be installed on farms or ranches without taking up too much space, allowing farmers to continue working the land.
They can also be utilized to power remote homes and businesses that lack an electrical connection. Furthermore, solar-powered devices have the capacity to run security systems, traffic signage, and water pumps.
Furthermore, these technologies can be integrated with other green technologies like solar or geothermal. This ensures you get the most from your investment while enjoying both renewable and non-renewable sources of energy.
When choosing an energy source, the most crucial thing to remember is your budget and the pros and cons of each option. Once you’ve made a list of priorities and needs, try selecting an energy source which will benefit you the most in the long run.
It is a reliable energy source
Wind turbine or electric generator is a mechanical device that converts the energy of wind into electricity. It can be used for many purposes such as powering up an electrical system, pumping water and driving a vehicle.
Wind power, unlike fossil fuels like coal that have been known to create environmental pollution and health issues among human population, does not emit any hazardous emissions. Furthermore, it produces electricity at a low cost and is an abundant renewable source.
Wind turbines consist of a rotor, main bearing, hub, low-speed shaft, gearbox and generator. The rotor spins slowly at between 8-20 revolutions per minute which is then converted into electricity by the generator.
Turbine generators are the backbone of any wind farm or electricity station. They transform wind energy generated by turbines into electricity which then gets sent to a main grid for distribution to homes and businesses around the world.
Wind turbines can be situated both on land and in large bodies of water. In these places, there is ample space to accommodate large turbines, and in some countries the government is funding projects that will facilitate offshore wind farm deployment.
However, it’s essential to weigh the potential drawbacks of wind energy when deciding if it makes sense for your community. For instance, wind turbines may interfere with wildlife such as birds and bats and cause harm to trees and other vegetation.
Wind speeds can fluctuate significantly, disrupting the amount of electricity generated by a given turbine. While this presents an obvious disadvantage, it can be minimized through sophisticated technology and computer control systems.
Wind turbines offer an attractive alternative to other forms of energy production such as coal, natural gas, hydropower and nuclear power. Unfortunately, these methods generate environmental pollutants and hazardous emissions like carbon dioxide and methane that contribute to global warming.
Wind power is becoming more and more reliable as technology progresses and new turbine designs become available. Furthermore, it has become a cost-effective energy source, producing power at a fraction of the price of other sources.
Hi, I’m David. I’m an author of ManagEnergy.tv where we teach people how to save energy and money in their homes and businesses.
I’ve been a writer for most of my life and have always been interested in helping people learn new things. When I was younger, I would write short stories for my classmates and teach them how to do math problems.
I love traveling and have been lucky enough to visit some fantastic places around the world.
Beginners Guides
Wind Turbine Life Expectancy

The lifespan of wind turbines varies based on several factors, including location, maintenance requirements and environmental conditions. On average, they should last 20-25 years under ideal conditions.
Most turbines possess service life reserves that can be extended beyond their original design lifespan with relatively minor, cost-effective repairs. This provides operators with an opportunity to generate revenue for longer periods of time.
Cost
Wind turbines are a long-term investment, which requires ongoing upkeep. While the initial cost may be high, if you live in an area with generous wind incentives, your return on investment should be positive over time.
Wind turbine life expectancies are determined by a variety of factors, including environmental conditions and fatigue as well as regular maintenance. Damage from lightning strikes, birds or collisions, ice or snow can significantly reduce energy output from these devices.
A turbine’s life span can be affected by its location and the quality of materials used. For instance, wind turbines installed in high-wind regions typically last longer than those situated in low wind areas.
Wind turbines typically have a design lifespan of 20 years, though this number can change based on various factors. For instance, local wind conditions may differ from what was intended when the turbine was initially created or expansions at nearby wind farms may increase turbulence.
These changes can significantly shorten a wind turbine’s lifespan. Estimates suggest that those installed within the last decade won’t make it to their 20-year mark, and even if they do, it is highly unlikely they will function at full capacity.
Wind farm operators must decide whether to keep operating the turbines or decommission them completely. This could involve an expensive process of taking apart and dismantling the turbine, selling or recycling valuable parts and then repowering with more modern technology.
Decommissioning old turbines can be expensive; replacing them with more energy-efficient models requires extensive research and development before these systems can be constructed at low prices.
Another way to reduce decommissioning expenses is recycling as many of a turbine’s materials as possible during its lifespan, especially blades which contribute significantly to energy loss.
Tens of thousands of outdated blades are discarded annually around the world, mostly in North America and Europe. The problem is getting worse as more turbines are constructed with shorter and longer towers for increased energy production. Unfortunately, much of this waste is non-recyclable and will end up in landfills where its fiber-reinforced plastic composition won’t break down easily.
Environmental conditions
The life expectancy of a wind turbine is determined by several environmental conditions. These include weathering, icing, lightning strikes, bird and insect collisions and structural damage to the blades or nacelle of the turbine. All these factors can cause it to break down prematurely, decreasing its energy output by up to 25%.
On average, wind turbines have a lifespan of 20 to 25 years; however, this may not be true for all farms. Some sites are more vulnerable to harsh environmental conditions than others and thus experience premature breakdown.
Another factor that may reduce a wind turbine’s life expectancy is how often it needs maintenance. Regular checks, including lubrication and replacement of worn parts or repair of damaged components, can significantly extend their service lives.
However, if a wind farm is unable to adequately maintain its turbines in an efficient and safe way, decommissioning may eventually be necessary. The decision for decommissioning must be site specific and take into account technical, economic and regulatory considerations.
One solution to this issue is recycling decommissioned blades. Some cities in the US have turned their decommissioned blades into playgrounds and other recreational spaces, while in Cork, Ireland the blades are being recycled into raw materials for cement manufacturing.
This is an important step, as it reduces the environmental impacts associated with landfilling waste. Furthermore, it enables more efficient disposal processes and minimizes potential air pollution caused by landfilling composite material waste.
In addition to this, there are other methods available for recycling and disposing of end-of-life wind turbine blades. These include:
The environmental effects of wind turbine manufacturing, transportation, on-site construction and assembly, operation and decommissioning can be greatly reduced if appropriate measures are taken at each step. To do this, an LCA study should be performed for each major stage. This will identify key stages that contribute most to overall environmental damage caused by a turbine and identify critical ones which can be redesigned with reduced negative effects in mind.
Maintenance
Wind turbines are complex machines requiring regular upkeep to stay operational. Preventative maintenance aims to extend their lifespan by making repairs or replacements before the equipment fails, while predictive maintenance utilizes monitoring systems that place sensors at key points within the machinery and send data back to the maintenance team for analysis.
Monitoring systems can identify any failures before they become more severe, helping reduce the costs of unscheduled stoppages, crane and repair equipment rental fees and revenue loss. For instance, if a turbine blade fails, there will be significant downtime and revenue loss from having to hire cranes to transport both the damaged component and technicians to a repair site.
Manufacturers typically recommend regular maintenance intervals for wind turbines, however these are often insufficient to keep them running optimally and securely. Inspections on a regular basis are essential in order to detect issues before they become more serious.
Most wind farm operators employ both preventive and predictive maintenance strategies to extend the life of their assets. Preventative work includes cleaning, lubrication, adjustments, and repairs; while predictive monitoring relies on sensors to track turbine condition and alert workers when it is time for a checkup.
With advances in technology, predictive maintenance is becoming a more commonplace practice. For instance, wind turbines can now be equipped with sensors that monitor lubrication levels, vibration levels, temperatures and foundation displacement – enabling workers to identify any issues early on.
Wind turbines can be highly complex and challenging to maintain due to their often remote locations, necessitating technicians to travel far distances for maintenance. Furthermore, since wind turbines typically rise 300 feet above the ground, there may be potential safety risks when working on the equipment.
Contemplating realistic maintenance plans and costs as part of project development is essential. Ideally, the contract phase should include a detailed discussion about operation and reliability data sharing with the turbine manufacturer; this will guarantee all parties are aware of specific component failure modes and can negotiate what post-warranty options exist to protect the asset.
Replacement
The life expectancy of a wind turbine is determined by several factors, including its location and environment. All these elements can influence its lifespan, so it’s essential to take them into account when planning any project.
On average, wind turbines have a lifespan of 20 years. If designed and maintained properly, then these machines should last much longer. Unfortunately, many wind farms fail due to various reasons.
One of the primary causes of wind turbine failure is wear and tear. This occurs due to exposure to harsh weather conditions, which can eventually lead to breakdown.
Therefore, it is imperative to replace a wind turbine as soon as possible when it starts malfunctioning. Doing this prevents you from losing valuable energy that could have been used for powering your home or business.
Additionally, you will save on the costs of replacing the turbine. A brand-new wind turbine is much more affordable than having to repair or replace an outdated model.
It is also worthwhile to remember that wind turbine components typically have a design lifetime estimate. If you plan on running your wind turbine for an extended period, then it is essential to take into account each component’s predicted lifespan.
The design lifetime of each component is determined by the materials used and their ability to withstand adverse conditions. For instance, rotor blades are usually constructed to withstand hurricane-force winds.
Another factor is the location of a component. This can influence how easy it is to repair it. If something is inside the turbine, for example, then access and maintenance may be difficult.
Thankfully, the industry is moving toward modular components. This makes replacing a wind turbine simpler since there’s no need to incur expensive labor expenses.
Hi, I’m David. I’m an author of ManagEnergy.tv where we teach people how to save energy and money in their homes and businesses.
I’ve been a writer for most of my life and have always been interested in helping people learn new things. When I was younger, I would write short stories for my classmates and teach them how to do math problems.
I love traveling and have been lucky enough to visit some fantastic places around the world.
Beginners Guides
Wind Turbines For Rooftops – Things You Should Know

Wind turbines are an efficient way to generate energy and lower your bills. But before you install them on your roof, there are a few things you should know.
First and foremost, they may not be suitable for every property. Not only can they be unsightly, but their noise levels may irritate your neighbors as well.
They’re a renewable energy source
Rooftop wind turbines are an affordable and eco-friendly way to generate renewable energy for your home. Not only do they reduce energy bills, but they also contribute towards combatting climate change!
They require zero electricity to run, making them an ideal option for homeowners living in rural areas or places where connecting to the power grid may be challenging. Furthermore, wind turbines use wind energy to generate renewable energy on cloudy days or nights when solar panels aren’t producing much output.
Before deciding whether or not to install a wind turbine on your roof, there are several factors you should take into account. Most importantly, assess the quality of wind in your area.
Wind is typically found higher up, away from trees or other objects that could cause turbulence. Your turbine will last longer and produce more energy if placed where there’s laminar wind (wind without much turbulence) rather than turbulent ones.
Before installing a wind turbine on your rooftop, it’s wise to research local laws and regulations. Some places may have limits regarding how many turbines can be placed there or even the height at which they must be placed.
At present, there are two primary types of wind turbines used for wind power production: horizontal-axis wind turbines (HAWTs) and vertical axis wind turbines (VAWTs).
HAWTs are commonly used on rooftops, but VAWTs can be more efficient when installed at lower elevations. Furthermore, these turbines tend to be smaller and easier to install than their HAWT counterparts.
A rooftop wind system could solve these issues by using aerodynamics similar to airplane wings to capture and amplify air flow on rooftops. This motionless technology, called AeroMINE, can be combined with solar panels for a completely green energy source.
They’re a good investment
Installing a wind turbine on your roof is an excellent way to cut energy costs and contribute to the environment. But before making such an investment, there are several things you should take into account.
Before anything else, it’s important to understand how much energy can be generated with a wind turbine. Most small models range between 400W and 1kW, meaning they can generate between 24 kWh of electricity daily (assuming the wind blows consistently at this speed).
However, this is not always the case. Turbulent winds tend to be less effective than laminar wind – air that has consistent speed and direction.
For optimal energy production, wind turbines should be placed in an unobstructed location that receives consistent, unobstructed wind. Unfortunately, living in a city may not provide this option since wind tends to blow in different directions and be more unpredictable.
Due to this, if your wind turbine cannot generate enough power from the environment, solar panels might be a more suitable option.
Solar panels can reduce your energy bills and even provide some of the power you need for running your home, especially if your local power company has an agreement to buy back any excess produced or you own an electric car.
Solar panels are more costly than wind turbines and must be installed on a property suitable for them. While it’s possible to connect a wind turbine to the grid, this requires an expensive upfront investment and only works in remote areas without access to electricity.
Finally, you should also be mindful of the noise your turbine will generate. Generally, small wind turbines won’t be any louder than your air conditioner, but they may generate vibrations which could weaken your roof structure.
Furthermore, rooftop wind turbines should never be installed on structures not intended to withstand the stresses and vibrations they cause. This is a sound rule of thumb for any kind of roof construction – not just those containing wind turbines.
They’re a good way to reduce your energy bills
Rooftop wind turbines are a renewable energy source that can drastically reduce your energy bills, especially if you live in an area with abundant wind power. Not only that, but these windmills also help you become more energy independent and reduce your carbon footprint.
Wind turbines, unlike solar panels that must be placed near the sun to work, can operate in any condition – even at night and with cloudy weather. That’s why they’re often combined with solar technology to generate electricity.
Rooftop wind systems can be an appealing prospect for both homeowners and businesses, but they come with their share of challenges. The primary one lies in making sure the turbines are spaced correctly so as not to collide and cause damage to your roof.
Aeromine has developed a rooftop wind turbine that utilizes the same aerofoil-based design used by airplane wings to lift themselves off the ground. This system, still in development, harnesses the same power as towering turbines but is much easier to install on homeowners’ roofs.
This approach relies on the fact that wind turbines don’t need to move as much as traditional ones do, meaning they could be placed closer together. This could help keep the equipment from producing excessive noise or vibration – a major drawback of other types of wind-powered systems.
Furthermore, a smaller device would not have to worry about getting damaged due to high winds that can wreak havoc on larger turbines. That makes it an ideal choice for areas with high levels of wind shear, which may weaken their power output.
However, installing a small rooftop wind turbine may not be worth the cost if you’re already connected to the grid and don’t require it for additional electricity production. According to EST estimates, an average household with a PS2,000 pole mounted turbine would only generate around 9,000 kilowatt hours of energy annually – not enough to significantly reduce your bill.
They’re a good way to save money
Wind power for home use is an efficient way to reduce energy bills and cut back on carbon footprint, thus lessening its environmental impact. But before you install a wind turbine on your roof, there are some things you should be aware of.
Wind power is a renewable resource, meaning that it doesn’t produce any pollutants or other hazardous chemicals. This makes it especially ideal for homeowners looking to live green and reduce their carbon footprints.
If you’re in search of a wind turbine for your rooftop, opt for one that generates an impressive amount of electricity. Smaller turbines won’t supply enough power to meet all your household demands.
Another factor to consider is tower height. To maximize the power of your turbine, it’s necessary for it to be at least 80 feet high; otherwise, you won’t get optimal performance from it.
Before making your final decision, it’s important to give careful thought to this factor. A taller turbine will be more efficient and there is less chance of it falling off the roof or damaging your property.
You should take into account the noise level generated by a wind turbine. While you don’t necessarily need to worry about this immediately, if your sensitivity to noise is any, then it’s worth taking into account.
In most cases, ambient sounds from your neighborhood and traffic will drown out the sound of a small wind turbine. However, turbulence amplifies vibrations so you may still hear it.
If you want to cut costs on your energy bill even further, installing a wind turbine for your roof is an ideal option. This is particularly true if combined with other renewable sources of energy like solar panels.
Wind turbines can be an excellent way to save money, but they may not be suitable for everyone. Some people find them unattractive and some neighborhoods find them undesirable. Before making the decision to install a wind turbine, do your research and discover what other clean energy options exist in your area.
Hi, I’m David. I’m an author of ManagEnergy.tv where we teach people how to save energy and money in their homes and businesses.
I’ve been a writer for most of my life and have always been interested in helping people learn new things. When I was younger, I would write short stories for my classmates and teach them how to do math problems.
I love traveling and have been lucky enough to visit some fantastic places around the world.
-
Sustainable Supply Chain Management3 months ago
ManagEnergy Acquires GPST2030.org Domain to Strengthen Commitment to Sustainable Transport
-
Electricity Vehicle9 months ago
The Future of Electric Vehicles: Trends and Innovations to Watch
-
Wind Energy3 months ago
How Much Oil Does It Take To Lubricate A Wind Turbine
-
Electric Motorbike7 months ago
California Electric Motorcycle Laws: A Comprehensive Guide to Riding Safely
-
Solar2 months ago
Why Aren’T Energy Companies Investing In Solar
-
Wind Energy7 months ago
Environmental Innovation Turned Deadly: Ocean Wind Turbines Pose Threat to Whales’ Survival
-
Hydrogen Fuel2 months ago
Is Hydrogen Fuel Better Than Electric
-
Wind Energy3 months ago
What Kind Of Energy Is Found In The Gearbox Of A Wind Turbine